Here are some suggestions:
1. Make sure the mobile concrete mixing plant and the surrounding environment are clean.
2. Remove the remaining material in the hopper in time to make the sensor return to zero normally.
3. Check the lubricating oil at each lubricating point, and the oil mist detector of the air circuit system should maintain enough lubricating oil.
4. Check the motor and electrical appliances for overheating and abnormal noise. Check whether the instrument is normal and whether the signal system is intact.
5. Check and adjust the cylinder, solenoid valve and butterfly valve.
6. Check the system frequently. If the system has ash, gas, oil, leakage and other problems, it should be dealt with in time.
7. The mixer and hopper should be cleaned every 4 hours to avoid the residual concrete from solidifying and hindering normal operation.
8. When using, it is necessary to drain the internal water of the air compressor, air tank and filter, and remove the faults in operation.
9. The maintenance of butterfly valves, mixers, solenoid valves, air filters, and oil mist devices should comply with relevant specifications.
Qualified manufacturers provide customers with dedicated maintenance advice to help them extend the life of their products. Attention to daily maintenance will bring you many benefits.
